Direct Immersion/Replacement RTD Assemblies
Table A (cont.)
| Figure 14 | Figure 15 | Figure 16 |
 |
 |
 |
| Figure 17 | Figure 18 | |
 |
 |
| Basic Order Code | ||||
| Fig. 14 | Fig. 15 | Fig. 16 | Fig. 17 | Fig. 18 |
| M
w/o mating female MF w/ mating female |
B | SB | BS(A) | SBS |
How to Order
| Pgs. 6-8 | – | Page 9 | – | – | Page 10 | ||||||
| Basic Order CodeSBTable A |
Sensor Diameter4Table B |
Element
A Table C |
Tolerance
1 Table D |
Temp. Range
A Table E |
Sheath Material1Table F |
Lead Conn.BTable G |
“L” Length6Table H |
Options
L Table I |
|||
RTD Assembly Specifications
| Sensor Diameter | Order Code | |
| 1/8″ | (.125″) | 2 |
| 3/16″ | (.188″) | 3 |
| 1/4″ | (.250″)STD | 4 |
| 5/16″ | (.312″) | 5 |
| 3/8″ | (.375″) | 6 |
| Resistance
0°C |
Material | Temperature Coefficient/Alpha (a) | Order Code | |
| Single Element | Dual Element | |||
| 100Ω | Platinum | .00385Ω/Ω°C | A | 2A |
| 100Ω | Platinum | .003916Ω/Ω°C | B | 2B |
| 100Ω | Platinum | .003902Ω/Ω°C | C | 2C |
| 98.129Ω
(100Ωnom-) |
Platinum
Sama Standard RC21-4-1966 |
.00392Ω/Ω°C | D | 2D |
| 120Ω | Nickel | .00672Ω/Ω°C | E | 2E |
| 9.035Ω | Copper | .00427Ω/Ω°C | F | 2F |
| Accuracy at 0°C | Order Code | |
| ± .12% | Class B | 1 |
| ± .06% | Class A | 2 |
| ± .03% | Lab Grade | 3 |
| ± .02% | Lab Grade | 4 |
| ± .01% | Lab Grade | 5 |
| Temperature Range | Order Code |
| -50 to +250 Deg. C
-58 to +482 Deg. F |
A |
| -50 to +400 Deg. C
-58 to +752 Deg. F |
B |
| -50 to +660 Deg. C
-58 to +1220 Deg. F |
C |
| Sheath Material | Order Code |
| 316 SS | 1 |
| Alloy 600 | 2 |
| Alloy C-276 | 3 |
| 2-Wire | Order Code A |
 |
|
| 3-Wire | Order Code B |
 |
|
| 4-Wire | Order Code C |
 |
|
| Specify “L” in Inches
Length Not required when Thermowell is used. |
Optional Connections
(For extended lead types)
Table I (options)
| Description | Order Code | ||
 |
Spade Lugs for #8 Screw | L | |
 |
Male Plug | M | |
| The connectors shown are for 3-wire single element assemblies.
Two – 2 Pin connectors mounted in tandem will be furnished for both styles of 4-wire single element assemblies. Dual element assemblies will have the same connector arrangements except Doubled. |
|||
 |
|||
| Female Jack | F | ||
 |
Watertight connector | 1/2″ NPT | W1 |
| 3/4″ NPT | W3 | ||
 |
Watertight connector with lugs for #8 screws | 1/2″ NPT | WL1 |
| 3/4″ NPT | WL3 | ||
| Optional Mounting Fittings | ||
| Description | NPT | Order Code |
 |
1/8″ | 1AS |
| 1/4″ | 2AS | |
| 3/8″ | 3AS | |
| 1/2″ | 4AS | |
| 3/4″ | 6AS | |
| For FEP readjustable insert, replace “A” with “R”
Example: 4RS |
||
| Optional Spring-Loaded Devices | |
| Description | Order Code |
Adjustable Spring |
FP 275 |
1/2″ NPT Double threaded adjustable hex bushing |
FP 240 |
1/2″ NPT single threaded adjustable hex bushing |
SSL |
